Four Function Drop In Decoder|
for Atlas VO-1000
||N Scale Supply
| || |
continuous motor drive
peak motor drive
100 mA function outputs
NOTE: TCS Recommends
the following CV Values: CV56=3, CV57=50 for Dither (digital pulse power)
detailed pictures showing the solder pad locations visit the TCS web site at:
here for application update
EMF Load Compensation for superior slow speed control even with heavy loads.
in style decoder for easy installation.
are almost transparent on DC, making the engine act like a decoder isn't there.
Brake on DC allows you to control the lights while the train is in a DC block.
Drive is active at all times.
provides rapid bursts of power to overcome resistance. You control both the power
and frequency. See slow speeds unequalled in the industry.
Effects: Auto-reversing headlights, Mars, Gyra, Rotary Beacon, Single- and Double-Pulse
Strobe, Opposite Dim, Flashing and Random flicker. Rule 17 headlight dimming can
be set to occur when stopped, opposite the direction of travel, or both. You always
have manual control.
Control allows you to pick the control buttons of your choice.
Reset lets you change most of your choices back to their factory default values
if you get into a situation you don't like.
speed steps are active when Mid volts, Top volts, Start volts or the user- loadable
speed table is active for much smoother operation.
2-digit addressing or advanced 4-digit addressing may be used.
Addressing has a Special Feature allowing you to automatically turn off any undesired
lighting when you add the engine to a consist.
decoders support all programming modes plus OPS mode ( on-track programming )
and meet NMRA DCC standards for compatibility.
to N Scale Supply catalog page for : Train Control Systems