N Scale Supply - Digitrax

Product Line: Digitrax

Digitrax Mobile Decoder for Kato SD40-2 Locomotive
Part #DIG-DN149K2 N Scale Supply Price: DISCONTINUED

This decoder is made to fit a specific locomotive, the following dimensions are provided to allow experimenters to determine additional locomotives that might be able to use this decoder. 0.426" (10.9mm) wide, 3.11" (79.0mm) long with LED, 2.71" (68.9mm) long without LED, 0.195" (4.7mm) at the thickest point. The LED leads on this decoder can be shortened or re-formed to accommodate installation in other locomotives if needed. This decoder has brass clips that can be re-formed or removed and replaces with wires to fit different contact arrangements in other locomotives.

Plug N' Play Decoder, easy no-solder installation
1 Amp (1.5 Amps Peak)
User scaleable High Resolution Speed Stabilization (Back EMF)
Integrated Digitrax Transponder
4 user configurable FX functions rated at 200ma
Smooth 14, 28 or 128 speed steps
Headlights can be directional or independent
User loadable speed tables
Two and four digit addressing & decoder assisted consisting (supports basic, advanced, or UniVersal)
User programmable address, acceleration, deceleration, start-, mid-point and max-voltage
Automatic conversion to analog operation
NOTE: This decoder is shipped with Yellow LED's while the Kato SD40-2 is equipped with Bright White LED's. Instructions are included for swapping the LED's.

Click here to view the Installation/Instruction Sheet included with Decoder

Back to Digitrax Mobile Decoder Page

To contact N Scale Supply email to:
sales@nscalesupply.com

Back To Main Page