DZ126IN
1 Amp Z / N / HO Scale Decoder with 6 Pin NEM 651 type plug
Fits Arnold SW-1 |
| Part #DIG-DZ126IN |
N Scale
Supply Price: $25.60 |
| New:
Augl 2014 | |
| Current
Rating | 1.0 Amp (1.5
Amps peak) | | Size |
Size: .36” x .42” x .13”
9.05mm x 10.61mm x
2.67mm | | Installation | Plug
in type | | Function
Outputs | 2 FX3 Functions,
0.5 Amp | | Function
Type | | FX3: |
- Turn functions on and off.
- Head
lights and tail lights are automatically reversing unless you make them independent.
- All function outputs have FX generators
for prototypical lighting effects and have qualifiers for FX effects and qualifiers
for standard on/off functions.
- All
Digitrax Series 3 decoders have FX3 type functions.
- FX3
decoders offer full function remapping so you can choose which function (F0-F12)
controls each function lead.
- FX3
decoders offer master light switch capability.
- FX3
decoders offer qualifiers for FX function operation qualified by one of the following:
the loco's direction of travel, whether F0 is on or off, loco direction and F0,
or whether the loco is moving or not. These qualifiers are also available on function
outputs that are used as standard on/off functions.
|
| | Features |
| Digitrax
LocoMotion® System | -
Scaleable Speed Stabilization (Back
EMF) with simple setup & 256 level resolution.
- Torque
Compensation.
- 128
Speed Step operation (14 or 28 steps can also be used).
- Momentum
with acceleration and deceleration.
- Normal
Direction of Travel is user selectable.
- Switching
Speed feature for easier and faster access to yard speeds.
- 3
Step Speed Tables set start, mid and max voltage for custom control.
- 28
Step Speed Tables with 256 level resolution for precise control.
- Program CVs using
any Digitrax Compatible Control system without havingto buy any extra equipment.
- Plug ‘N Play
8-pin Medium DCC plug design makes installation quick and easy.
- 2
Digit and 4 Digit Addressing.
- Basic,
Advanced & UniVersal Consisting.
- SuperSonic
motor drive for silent operation.
- Direct
mode programming.
- Decoder
Reset CV with or without speed table reset.
- Transponder
Equipped ready for transponding on your Layout.
- Motor
Isolation Protection helps prevent damage to your decoder.
- Automatic
Analog Mode Conversion when running on DC layout.
- Decoder
Lock for individual programming of multiple decoders in one loco.
- Digitrax
“No Worries” Warranty.
| |
| Full Spec Sheet | Click
here | Back
to N Scale Supply catalog page for : Digitrax Mobile Decoders Back
to N Scale Supply catalog page for : Digitrax |
