The LokPilot
5 DCC is the "twin brother" of the LokPilot 5. The
two share almost all characteristics, however, the LokPilot
5 DCC is a pure DCC decoder and cannot be used on analog AC
systems. This lack of flexibility comes with a cheaper price.
LokPilot
5 decoders are offered with all common interfaces.
Modes
The LokPilot
5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed
steps are as natural as 2- and 4-digit addresses. Up to 32
functions can be triggered. Thanks to RailComPlus® the
decoders register automatically with a suitable DCC system
like the ESU CabControl.
The decoder
accepts all DCC programming modes and thanks to RailCom®
the CV values ??can be read on the main track with RailCom
equipped DCC systems. For command stations that only program
the CVs from 1-255 auxiliary CV registers exist.
The LokPilot
5 DCC decoder recognizes the Märklin® braking sections
as well as the ZIMO® HLU / ZACKCommands or the Lenz®
ABC system. Also braking with DCC brake modules or with DC
voltageis possible. It also stops with a Selectrix® brake
diode. An ABC automatic shuttle trainenables automatic commuting
between two train stations.
The LokPilot
5 DCC decoder can be used on analog DC trains. The top speedcan
be set separately.
The decoder
switches between the operating modes fully automatically "on-the-fly".
Features
We know
that you want your locomotives to be as realistic as possible.
Therefore we have the LokPilot 5DCC packed with function outputs.
Depending on the interface version, each LokPilot offers 5
DCCDecoder at least 10 amplified function outputs with 250mA
output current each. In the executionswith PluX22 or 21MTC
interface there are 4 outputs to control servos orLogic level
outputs added. All-important lighting functions are available.
The brightness of each outputcan be set separately. The decoder
masters automatic pushing and pullingwhen uncoupling for ROCO®,
Krois® and Telex® couplings.
Motor
control
The engine
control of the LokPilot 5 DCC has been fundamentally improved
again. A variably adjustablePWM clock frequency from 10kHz
to 50kHz ensures super quiet operation, especially with bell-armature
motors.Operation - The typical “hum” is a thing of the past.
The load control now has up to10 CVs which can be adjusted
for difficult cases. The unique "Autotune" function
enablesthe automatic calibration of the decoder to the motor.
The LokPilot 5 DCC decoder delivers up to 1.5A of motor current.
Enough juice even for older motors.
Operational
safety
On request,
a PowerPack can be fitted to the LokPilot 5 DCC to bridge
dirty rail sections.
Protection
Of course,
all function outputs and the motor output are protected against
overload.
We want
you to enjoy your decoder for as long as possible.
