| M4 -
Four Function Micro Decoder |
| Part #TCS-M4 |
N Scale Supply
price: $49.56
|
| New: Janruary 2006 |
|
|
|
| Electronic
Specifications: |
| |
- One-amp
continuous motor drive
- two-amp peak motor drive
- Four 100 mA function outputs
|
| Size:
|
| |
- Length: 0.570"
- Width: 0.355"
- Height: 0.132"
|
|
| |
| Features: |
- Will easily power HO-scale
engines yet is small enough for many N-scale installations.
- Adjustable Dimming
- Auto detect allows operation
on DCC only or DCC and DC power. TCS decoders are almost transparent on DC, making
the engine act like a decoder isn't there. Brake on DC allows you to control the
lights while the train is in a DC block.
- Three point acceleration
and deceleration curves. Allows stretching of acceleration rates at the slow speeds.
You are no longer limited to a straight line accel / decel rate.
- Quiet Drive is active
at all times, which greatly reduces engine noise.
- Dither (digital pulse
power) provides rapid bursts of power to overcome resistance. You control both
the power and frequency. See slow speeds unequalled in the industry.
- Lighting Effects: Auto-reversing
headlights, new improved Mars, Gyra, Prototypical Blinking Ditch Lights, Rotary
Beacon, Opposite Dim, Single and Double Pulse Strobe, Rule 17, Flashing and Random
flicker. Rule 17 headlight dimming can be set to occur when stopped, opposite
the direction of travel, or both. You always have manual control.
- Button Control allows
you to pick the control buttons of your choice.
- Factory Reset lets you
change most of your choices back to their factory default values if you get into
a situation you don't like.
- 128 speed steps are active
when Mid volts, Top volts, Start volts or the user- loadable speed table is active
for much smoother operation.
- Primary 2-digit addressing
or advanced 4-digit addressing may be used.
- Consist Addressing has
a Special Feature allowing you to automatically turn off any undesired lighting
when you add the engine to a consist.
- TCS decoders support all
programming modes plus OPS mode ( on-track programming ) and meet NMRA DCC standards
for compatibility.
|
Back to N Scale Supply
catalog page for : Train Control Systems
|
