|
Install Risers
wherever track will be laid on curves and straights. This raises the
track level to the height of the Risers, causing surrounding areas to
be lower. Modelers can quickly and easily make creeks and other low-lying
areas without cutting into the layout base.
Each piece is 2-1/2" wide by 24" long.
Risers
High-density foam Risers are used to elevate track. With the surrounding
areas lower, modelers can quickly and easily create creek beds, ravines
and other low-lying areas without the mess and inconvenience of expensive
power tools.
What Size Do
I Need?
Risers are available in 1/2", 3/4", 1", 2" and 4"
heights. We recommend using at least a 2" Riser to elevate your
track. This will provide moderate elevation for gradual relief, hills
and creek beds. Use a 4" Riser to give you maximum elevation for
steep relief, rivers, valleys and other more dramatic landscape. Generally,
1/2", 3/4" and 1" Risers are used in conjunction with
Incline Starters.
|
| Description |
Image |
Our
$ |
Part
# |
| 1/2
x 24-inch Riser (4 ea)
Install
foam Risers wherever track will be laid. This raises the track
level to the height of the Risers, causing surrounding areas
to be lower. You can quickly and easily make creeks and other
low-lying areas without cutting into the layout base. Use at
least 2" Risers to elevate track. 1/2" and 1"
Risers are generally used with Incline Starters to create varying
grades. Each piece is 2 1/2" wide x 24" long.
|
 |
$10.99 |
WSC-ST1406 |
| 1
x 24-inch Riser (4 ea)
Install
foam Risers wherever track will be laid. This raises the track
level to the height of the Risers, causing surrounding areas
to be lower. You can quickly and easily make creeks and other
low-lying areas without cutting into the layout base. Use at
least 2" Risers to elevate track. 1/2" and 1"
Risers are generally used with Incline Starters to create varying
grades. Each piece is 2 1/2" wide x 24" long.
|
 |
$12.99 |
WSC-ST1407 |
| 2
x 24-inch Riser (4 ea)
Install
foam Risers wherever track will be laid. This raises the track
level to the height of the Risers, causing surrounding areas
to be lower. You can quickly and easily make creeks and other
low-lying areas without cutting into the layout base. 2"
Risers should be the minimum height used to elevate track. Each
piece is 2 1/2" wide x 24" long.
|
 |
$13.99 |
WSC-ST1408 |
| 4
x 24-inch Riser (2 ea)
Install
foam Risers wherever track will be laid. This raises the track
level to the height of the Risers, causing surrounding areas
to be lower. You can quickly and easily make creeks and other
low-lying areas without cutting into the layout base. 4"
Risers give maximum elevation for steep relief. Each piece is
2 1/2" wide x 24" long.
|
 |
$13.99 |
WSC-ST1409 |
| 3/4
x 24-inch Riser (4 ea)
Install
foam Risers wherever track will be laid. This raises the track
level to the height of the Risers, causing surrounding areas
to be lower. You can quickly and easily make creeks and other
low-lying areas without cutting into the layout base. 3/4"
Risers work great with 3% Inclines and Starters. Each piece
is 2 1/2" wide x 24" long.
|
 |
$9.99 |
WSC-ST1414 |
Back
to N Scale Supply catalog page for : Woodland Scenics
|
